Thermal Fluid Heating Systems

Your Go-To Source for Industrial & Commercial Boiler Products

Product	Forced Circulation, Multi-coiled Tube, Forced Draft Fired.
Pressure	750ºF design temperature, up to 250 PSIG.
Fuels	Air Atomized Oil, Multi-orficed Gas by Thermogenics
Efficiency	Up to 84%
Safety	Programmed Flame Safeguard Control with Ultra Violet Flame Detection. Individual Coil Temperature Control and Outlet Temperature Limits.
Codes	Registered to ASME and CSA requirements and Hydro approved.

Thermal Fluid Heating Systems

Efficient, safe and economical process heat, up to 20,000,000 BTU/Hour Output.

4 – 1000 BHP Fulton Products

Thermal Fluid Specs

Need more specs? We partner with Fulton.

High Efficiency Features

No refractory combustion chamber, new membrane wall furnace.
Redesigned combustion air blower ensures quiet operation.
Redesigned damper blades on combustion blower provide lower excess air levels.
Redesigned burner increases efficiency
Optional linkageless control provides lower turndown rates and more consistent efficiencies across the modulating range.
4-20 ma modulation for feedback to PLC based Lead/Lag Control.
Complete flexibility on burner management systems.
Solid state coil temperature system with individual temperature readouts and set points.

Standard Features

Fully modulating burner with 10-1 turn down on Natural Gas, propane and #2 Oil.
Switch controls and warning devises located in a central control panel at the front of the boiler skid for ease of operation and trouble shooting.
All coils have individual monitoring sensors.
Quick response to load changes.
Rapid start up from cold start.
Long life with minimal maintenance coils designed for 1000 PSIG
Rear door access at floor level without disturbing refractory seal.
All electrical boxes are oil/dust tight.
All electrical conduit liquid tight.
Separate high voltage side panel.
Combustion air blower at floor level for ease of inspection and maintenance.
Recirculating pump and combustion blower direct drive.
Most service connections located at common junction point.
Double walled boiler shell preheats combustion air and cools outer casing, thereby minimizing radiation losses.
Optional air or water cooled pumps.
Optional deaerator/expansion tanks.

Ancillary Equipment

Other Categories

Steam Boilers

Steam Boilers

Up to 1000 BHP / 9,809KW

View Steam Boilers

Critical Hot Water Boilers

Critical Hot Water Boilers

2.51 – 20.08mmBtu/hr (5,866 KW)

View Critical Hot Water Boilers

Thermal Fluid Heating Systems

Thermal Fluid Heating

2.51 – 40.00mmBtu/hr (5,866 KW)

View Thermal Fluid Heating

Boiler Room Ancillaries

Boiler Room Ancillaries

Complete Solutions

View Boiler Room Ancillaries

Rentals

Rentals

150 – 500 BHP Steam, Hot Water
View Rentals

Engineered Systems

Engineered Systems

Up to 1000 BHP / 9,809KW

View Engineered Systems

Burners

Burners

Customizable Solutions

Hydronic Condensing Boilers

Hydronic Condensing Boilers

399,000 – 12,000,000 BTU/HR

View Hydronic Condensing Boilers

Ancillary Equipment

Ancillaries

Equipment for Optimal Steam Boiler Performance

View Ancillaries

Electric Boilers

Electric Boilers

Size Range: 1.2 - 100 BHP

View Electric Boilers

Thermal Fluid (Hot Oil) Heating Systems

Thermal Fluid (Hot Oil) Heating Systems

30 – 1,200 US gallons capacity

View Thermal Fluid (Hot Oil) Heating Systems

ST Series Steam Generators

ST Series Steam Generators

40 BHP to 200 BHP output

View ST Series Steam Generators

Looking for a smaller footprint?

Fulton Steam Boilers. The heat transfer innovators

Thermogenics and Fulton have had an intimate working relationship for over 40 years. Since March 2011, Thermogenics became the exclusive Fulton Representative in the province of Ontario. With access and expertise in the Fulton Steam, Hot water and Thermal Fluid departments. Fulton has over 60 years of expertise in the industry and has expanded its manufacturing techniques globally with steam, hot water and thermal fluid heat transfer systems.